前言
Arduino 是一套开源电子原型平台，拥有简单易用的开发框架与丰富开源库，而 ESP32‑S3 是乐鑫推出的高性能物联网主控芯片，支持在 Arduino 环境下开发，搭载双核 240MHz 处理器，集成 2.4G Wi‑Fi、蓝牙 5.0、USB 接口与 AI 向量加速指令，外设资源充足，非常适合用来制作物联网、人机交互和边缘 AI 类项目。
添加开发版管理器地址：
配置项
USB CDC On Boot - On
TimeLib
参考：
现在引入的头文件是 TimeLib.h，而不是旧版的 Time.h，原因是 Windows 这类操作系统无法区分该库的 Time.h 和 C 标准库中的 time.h。
TFT_eSPI
参考：
bootloader.bin
开源项目文件夹里有 bootloader.bin，但和实际镜像不匹配。
Sketch uses 1611096 bytes (51%) of program storage space. Maximum is 3145728 bytes.
Global variables use 56600 bytes (17%) of dynamic memory, leaving 271080 bytes for local variables. Maximum is 327680 bytes.
esptool v5.3.1
Serial port COM12:
Connecting...
Connected to ESP32-S3 on COM12:
Chip type: ESP32-S3 (QFN56) (revision v0.2)
Features: Wi-Fi, BT 5 (LE), Dual Core + LP Core, 240MHz, Embedded PSRAM 8MB (AP_3v3)
Crystal frequency: 40MHz
USB mode: USB-Serial/JTAG
MAC: **:**:**:**:**:**
Uploading stub flasher...
Running stub flasher...
A fatal error occurred: 'C:\Users\AlexSheng\AppData\Local\arduino\sketches\35275430120BF8872B785DE30FD5D7D5/SmallDesktopDisplay.ino.bootloader.bin' is not an an ESP32-S3 image. Use the force argument to flash anyway.
Stub flasher running.
Changing baud rate to 921600...
Changed.
Warning: Unexpected chip ID in image. Expected 9 but value was 5. Is this image for a different chip model?
Hard resetting via RTS pin...
Failed uploading: uploading error: exit status 2固件太大
Sketch uses 1616084 bytes (123%) of program storage space. Maximum is 1310720 bytes.
Global variables use 56416 bytes (17%) of dynamic memory, leaving 271264 bytes for local variables. Maximum is 327680 bytes.
Sketch too big; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing it.
text section exceeds available space in board
Compilation error: text section exceeds available space in board更改 Flash Size 和 Partition Scheme。